HUF EUR USD
Forgotten password
Contents:
0 item: 0,00 EUR
Main pageProductsOutletManufacturersPrice listDownloadsNewsPresentationsAbout usContact

General

Descriptions of actual system:
Cable length: m Power supply: V Minimum voltage of equipment: V

In the chart below you can get the value of loss of voltage if you know the cable length, the cross-section and the load.
Current: mA Cross-section: mm2 Loss of voltage: 3,02 V
  Voltage of load: 9,98 V
Note: results are approximate presuming the usage of copper cables at room temperature.

In the chart below you can get the value of maximum load on the power supply if you know the minimum voltage demand of your equipments and the parameters of the supply cable.
Cross-section: mm2 Maximum load: 297,97 mA
Note: results are approximate presuming the usage of copper cables at room temperature.

In the chart below you can get the size of cross-section if you know the voltage of power supply, the minimum voltage of your equipments, the load and the length of the supply cable.
Maximum load: mA Minimum cross-section: 0,5 mm2
Note: results are approximate presuming the usage of copper cables at room temperature.

Behatolásvédelem

Descriptions of actual system:
Cable length: m Power supply: V Minimum voltage of equipment: V

Approximate current:
PIR, acoustic glassbr. det (10 mA) pcs Beam detector (small) (40 mA) pcs
Dual detector (PIR+MW) (20 mA) pcs Beam detector (medium) (80 mA) pcs
Extender unit (30 mA) pcs Beam detector (large) (135 mA) pcs
Keypad (100 mA) pcs 2 pcs SADRIN heater (500 mA) pcs
RF receiver (100 mA) pcs 2 pcs Ales heater (710 mA) pcs
Reader via BUS w/o lock (40 mA) pcs SMARTLINK communicator (650 mA) pcs
External reader w/o lock (150 mA) pcs NEXUS communicator (900 mA) pcs
Electric lock (200 mA) pcs Sounder (Smarty, 130 mA) pcs
Approximate summary (mA):

In the chart below you can get the value of voltage loss if you know the cable length, the cross-section and the load.
Current: Loss of voltage:
Cross-section: Loss of voltage:
Note: results are approximate presuming the usage of copper cables at room temperature.

In the chart below you can get value of the maximum load if you know the power supply output, the minimum voltage of equipments and the parameters of the supply cable.
Cross-section: mm2 Maximum load:
Note: results are approximate presuming the usage of copper cables at room temperature.

In the chart below you can get the minimum cross-section if you know the power supply, the current and the cable length.
Maximum load: Minimum cross-section:
Note: results are approximate presuming the usage of copper cables at room temperature.

Surveillance system 12V

Descriptions of actual system:
Cable length: m Power supply: V Minimum voltage of equipment: V

Current, közelítő értékekkel:
Beltéri dome kamera (150 mA) pcs Beltéri dome kam. IR-rel (300 mA) pcs
Kültéri dome kamera (300 mA) pcs Kültéri dome kam. IR-rel (400 mA) pcs
Box kamera (500 mA) pcs Külső IR világítás (500 mA) pcs
Beltéri kompakt kamera (150 mA) pcs Beltéri kompakt IR-rel (400 mA) pcs
Kültéri kompakt kamera (250 mA) pcs Kültéri kompakt IR-rel (500 mA) pcs
Rejtett kamera (200 mA) pcs Nagyteljes.kült.kamera (2500 mA) pcs
Nyolc-csatornás rögzítő (1250 mA) pcs HD-SDI RPTR/HDMI (1000 mA) pcs
Összesen, mA (táblázatbeli közelítő értékekkel számolva):

Az alábbiakban megkapja a Loss of voltage nagyságát, amennyiben ismert a Cable length, a Cross-section és a terhelés.
Current: Loss of voltage:
Cross-section: Loss of voltage:
Note: results are approximate presuming the usage of copper cables at room temperature.

Az alábbiakban megkapja, hogy mekkora lehet a maximális terhelés a tápegység kimenetének, a fogyasztók Minimum voltage of equipment igényének, valamint a tápkábel paramétereinek függvényében.
Cross-section: mm2 Maximum load:
Note: results are approximate presuming the usage of copper cables at room temperature.

Az alábbiakban megkapja, hogy mekkora a minimális érCross-section szükséges a Power supply, a fogyasztók Minimum voltage of equipment igényének, az Current, valamint a tápkábel hosszának függvényében.
Maximum load: Minimum cross-section:
Note: results are approximate presuming the usage of copper cables at room temperature.

Surveillance system 24V

Descriptions of actual system:
Cable length: m Power supply: V Minimum voltage of equipment: V

Current, közelítő értékekkel:
Speed dome kamera (3000 mA) pcs Kompakt kamera (700 mA) pcs
Dome kamera (600 mA) pcs Boxkamera (700 mA) pcs
Összesen, mA (táblázatbeli közelítő értékekkel számolva):

Az alábbiakban megkapja a Loss of voltage nagyságát, amennyiben ismert a Cable length, a Cross-section és a terhelés.
Current: Loss of voltage:
Cross-section: Loss of voltage:
Note: results are approximate presuming the usage of copper cables at room temperature.

Az alábbiakban megkapja, hogy mekkora lehet a maximális terhelés a tápegység kimenetének, a fogyasztók Minimum voltage of equipment igényének, valamint a tápkábel paramétereinek függvényében.
Cross-section: mm2 Maximum load:
Note: results are approximate presuming the usage of copper cables at room temperature.

Az alábbiakban megkapja, hogy mekkora a minimális érCross-section szükséges a Power supply, a fogyasztók Minimum voltage of equipment igényének, az Current, valamint a tápkábel hosszának függvényében.
Maximum load: Minimum cross-section:
Note: results are approximate presuming the usage of copper cables at room temperature.

Power supplies (230V)

Descriptions of actual system:
Cable length: m Power supply: V Minimum voltage of equipment: V

Current, közelítő értékekkel:
12 V DC lineáris tápegység mA Teljesítményfelvétel (korrigált)
12 V DC kapcsoló üzemű tápegys. mA Teljesítményfelvétel (korrigált)
13,8 V DC lineáris tápegység mA Teljesítményfelvétel (korrigált)
13,8 V DC kapcsoló üzemű tápegy. mA Teljesítményfelvétel (korrigált)
24 (27,6) V DC lineáris tápegység mA Teljesítményfelvétel (korrigált)
24 (27,6) V DC kapcsoló üzemű t. mA Teljesítményfelvétel (korrigált)
24 V AC transzformátorral mA Teljesítményfelvétel (korrigált)
230 V AC közvetlen mA Teljesítményfelvétel (korrigált)
Összes teljesítményfelvétel, VA (hatásfokkal korrigált értékekkel számolva):
Összesen Current, A (hatásfokkal korrigált értékekkel számolva):

Az alábbiakban megkapja a Loss of voltage nagyságát, amennyiben ismert a Cable length, a Cross-section és a terhelés.
Current: Loss of voltage:
Cross-section: Loss of voltage:
Note: results are approximate presuming the usage of copper cables at room temperature.

Az alábbiakban megkapja, hogy mekkora lehet a maximális terhelés a tápegység kimenetének, a fogyasztók Minimum voltage of equipment igényének, valamint a tápkábel paramétereinek függvényében.
Cross-section: mm2 Maximum load:
Note: results are approximate presuming the usage of copper cables at room temperature.

Az alábbiakban megkapja, hogy mekkora a minimális érCross-section szükséges a Power supply, a fogyasztók Minimum voltage of equipment igényének, az Current, valamint a tápkábel hosszának függvényében.
Maximum load: Minimum cross-section:
Note: results are approximate presuming the usage of copper cables at room temperature.


Back

Sütik
Az oldal sütiket (cookie) használ. További információ az Adatvédelmi tájékoztatóban olvasható.

Tudomásul veszem